Minimize Gear Reducer Mounting Failures for Improved Productivity
Have you ever had difficulty mounting a gearbox? Don’t worry, you’re not alone. Mounting can be a hassle and creates numerous issues for customers. Improper motor mounting and incorrect specification of the mounting position are some of the leading causes of premature failure. Let us help you minimize gear reducer mounting failures.
Gearbox Motor Installation
When installing a motor, make sure the coupling is the specified distance from the motor face. Failure to correctly locate the coupling on the motor shaft may cause axial thrust loads, which can result in premature failure of either the motor bearings or the adapter bearings.
How Oil is Affected By The Correct Mounting Position
Specifying the correct mounting position is often difficult for users. They may not know how the gearbox will be mounted yet or may not understand how the manufacturer labels the positions. However, knowing the mounting position is vital. It determines the gearbox’s oil quantity, which ensures all gears and bearings are properly lubricated.
Problems with Too Much or Too Little Oil in the Gearbox
Problems can arise if there is too much or too little oil. Too much oil limits the area for thermal expansion during operation. This creates pressure on the seals, which could eventually lead to seal failure. Too little oil in the unit means critical components may not be properly lubricated, which can also result in failure.
Manufacturers make other modifications depending on the mounting position. For example, some gearboxes use Nilos Rings and Shielded bearings to lubricate bearings not in the oil bath. Others use double seals on outputs to withstand the weight of the oil pressing against them. Larger gearboxes utilize breathers to relieve thermal expansion pressure.
How STOBER has Minimized Gearbox Mounting Failures
At STOBER, we have minimized mounting failures through several initiatives. We have simplified mounting positions by allowing for any horizontal mounting, meaning the gearbox can be mounted in all 4 horizontal output positions without any additional modification to the unit. All washdown application gearboxes use double seals. Every STOBER gearbox is filled with Exxon Mobil oil before leaving the factory and is lubed for life if no breather is required.
See how simple mounting can be. Check out our free download about properly mounting your gearbox with a torque arm and minimize gear reducer mounting failures.