- Company & Career
Small angular gear unit. No offset. Compact. Plug-on pinion. Helical gearing. On request: direct motor mounting.
|Type||Module [mm]||Number of teeth||Max. permitted acceleration feed force [kN]||Max. feed velocity [m/s]||Linear backlash [μm]|
|ZV2_KL102||2||16||1.3 – 1.6||0.33 – 2.2||99 – 123|
|ZV2_KL202||2||20||2.2 – 2.9||0.42 – 2.8||99 – 123|
- Helical gearing
- Gearing quality 7
- Case hardened and ground
- Two attachment positions on the shaft are possible
-- Toothing flush with shaft end (pos. E)
-- Toothing flush with shaft shoulder (pos. S) for higher permissible shear forces
- Backlash-free shaft/hub connection (shrinkpasted and feather key connected)
- Pinion securing mechanism axially with disk and screw (optional)
Our cooperation partner Atlanta offers matching gear racks for our products.
- Any mounting position.
- Synthetic lubricant CLP HC ISO VG 150
- Lubricated for life
Rack and pinion drive:
- Lubrication of the rack and pinion drive must be carried out by the customer.
- For this purpose, we recommend only the use of high quality synthetic oil based grease of NLGI grade 0.
- Universal motor mounting system for almost all synchronous servo motors.
- Fast and secure motor mounting.
- Backlash-free plug-in coupling for motor shafts without key.
- Robust, balanced coupling.
- Thermal length compensation.
- Low mass inertia.
EZ synchronous servo motors
For further information see Synchronous Servo Motors