Hollow Output – ServoFit Modular System

“F” Series

(Dimensions)
  
(Specifications)

 

F SeriesCompact size and flexibility make these gear drives a popular choice for applications that require high performance, efficiency, and durability. Series “F” gear drives, like all SMS units, are available with a wide selection of configurations to match almost any mounting requirement.

  • One-piece cast iron housing with precision machined bearing support assures gearset alignment, prolongs bearing life, provides exceptional overhung load capacities, and eliminates leakage problems common to two-piece housings
  • High quality helical gearing is case hardened to 58-62 Rockwell C. Precision finished for low noise and long service life.
  • Standard backlash is <11 arc minutes. Reduced backlash is <7 arc minutes
  • Double lip seals keep oil in and contaminants out. Double seals available for severe duty applications
  • Shipped with the proper amount and type of oil to prevent gear damaging dry start-ups
  • Output Options: solid shaft, hollow output and backlash free - wobble free bushings. Also available in metric or stainless steel output

Beverage, Food, and Washdown Duty

F Series Washdown
  • Double sealed output — with a dual-lip outer seal and a single-lip inner seal
  • ALL stainless steel hardware
  • Output options:
    • Patented (U.S. Patent Number 5,496,124) stainless steel double sided bushing mounted into a stainless steel quill — easily mounts onto standard cold finished, ground, or stainless shafting
    • Hollow output (not available in all sizes)
  • Coating options:
    • Beverage (3 layers)
      • 1 - Primer
      • 2 - Industrial 316 stainless steel epoxy
    • Food (4 layers – USDA approved for use in processing and handling)
      • 1 - Primer
      • 2 - Industrial 316 stainless steel epoxy
      • 1 - Silver Bullet Anti-Microbial™ epoxy
    • Other options:
      • 1 layer of Ultra Clear Industrial epoxy
      • White epoxy (USDA approved)
Silver Bulllet AM™ is a registered trademark of Burke Industrial Coatings.

Standard Delivery 3 days

Readily attaches to any servo motor. A wide selection of IEC and NEMA motor plates are stock. (Maximum 10 working days for custom motor plates.)

Motor plate pilot toleranced to fit your motor for precise concentricity

Input RPM up to 4,500

Nominal output torque - 200 to 9,700 in. lbs. (22 to 1,100 Nm)

Reducer ratios from 4.1:1 to 540:1

Ambient temperature - 0°C to + 40°C (104°F)

Noise level - as low as 53 dB(A)

Up to 95.5% Efficiency

Maintenance free

5 year limited warranty (2 years on bearings, seals, etc.)

ServoStop